3
4
1
2
God created the world so that his creatures could live in it perfectly. It is no coincidence that the earth has an electric charge on its surface. God wanted it that way. If there were no electrical …More
God created the world so that his creatures could live in it perfectly. It is no coincidence that the earth has an electric charge on its surface. God wanted it that way. If there were no electrical charge on the surface of the earth, the Earth would look much more like the moon or the planet Mars... People who are electrically separated from the earth with shoes with insulating soles do not realize not that they are deprived of a natural and vital electrical contact under their feet, and they deprive themselves of it through ignorance.

If people knew that people's health depends on their physical contact with the Earth, they would more easily find solutions to a multitude of health problems. A good way to do this on a daily basis is to first take a one meter zinc plated steel rod like the one that looks like a very long screw and cut it into two parts, and drive one outside near the house at a depth of only 30cm. Attach a steel wire to the top, and connect it with a simple electrical wire using only one of the two parts. The wire is passed through the window of the house, and this conductive wire is attached to a gridded pin mesh surface. You can do voltage tests with a multimeter. You will observe approximately 540 millivolts. You put the black probe on the wire that comes from outside the house, and put the red probe in the 'ground' of a regular electrical outlet. You will actually see the voltage coming from the ground surface outside. You can increase this voltage by placing a magnesium rod planted in the ground near the steel rod. By connecting them together, you will have 940 millivolts, and so on with as many additions as you want, even inside the house. The conductive wire is passed through a copper rod into a container of sand with water to wet the sand, and cause the electric charge to come out through the magnesium rod. The voltage will be increased by 1.4 volts!!! In total, we are down to 2.4 Volts. And another transit of the kind in series, we gain 1.4 volts each time, and they accumulate!!! Magnesium is sensitive to contact with water. A little vaseline or petroleum jelly will make the magnesium rod hydrophobic, and the voltage will still pass, and the magnesium will be protected against corrosion!!! My setup gives me around 4 volts in total, and that's already a lot. We can stay properly between 500 millivolts and 2.4 volts, and it will be perfect like that! Experiment and you will quickly appreciate the direct contact with the spindle mesh connected to the steel rod outside the house. The body needs to be charged with electrons.

As I am French-speaking, I first wrote in French before having it automatically translated.
____________________________________________________________________

Dieu a créé le monde pour que ses créatures puissent y vivre parfaitement. Ce n'est pas un hasard si la terre a une charge électrique à sa surface. Dieu l'a voulu ainsi. S'il n'y avait pas de charge électrique à la surface du sol, la Terre ressemblerait bien plus à la lune ou à la planète Mars... Les gens qui sont électriquement séparés de la terre avec des souliers à semelles isolante ne réalisent pas qu'ils sont privés d'un contact électrique naturel et vital sous leurs pieds, et ils s'en privent par ignorance.

Si les gens savaient que la santé des gens dépend de leur contact physique avec la Terre, ils trouveraient ainsi plus facilement des solutions à une multitude de problèmes de santé. Une bonne manière d'y parvenir au quotidien est celle d'abord de prendre une tige d'acier plaquée zinc d'un mètre comme celle qui ressemble à une très longue vis et de la couper en deux parties, et d'en planter une dehors près de la maison à une profondeur de 30cm seulement. Fixez un fil d'acier au sommet, et reliez-la avec un fil électrique simple dont on n'utilise qu'une seule des deux parties. On fait passer le fil par la fenêtre de la maison, et on fixe ce fil conducteur à une surface de treillis de broche quadrillée. Vous pouvez faire des tests de voltage avec un multimètre. Vous allez observer environ 540 millivolts. Vous mettez la sonde noire sur le fil conducteur qui vient de l'extérieur de la maison, et mettez la sonde rouge dans le 'ground' d'une prise électrique ordinaire. Vous allez voir réellement le voltage qui vient de la surface du sol dehors. Vous pouvez augmenter ce voltage en mettant une tige de magnésium plantée dans le sol à proximité de la tige d'acier. En les reliant ensemble, vous allez avoir 940 millivolts, et ainsi de suite avec autant d'ajouts qu'on veut, même à l'intérieur de la maison. On fait passer le fil conducteur par une tige de cuivre dans un contenant de sable avec de l'eau pour mouiller le sable, et faire sortir la charge électrique par la tige de magnésium. Le voltage sera augmenté de 1.4 volt !!! Au total, on est rendu à 2.4 Volt. Et un autre transit du genre en série, on gagne 1.4 volt à chaque fois, et s'accumulent !!! Le magnésium est sensible au contact de l'eau. Un peu de vaseline ou de gelée de pétrole va rendre hydrophobe la tige de magnésium, et le voltage va passer quand même, et le magnésium sera protégé contre la corrosion !!! Moi, mon montage me donne autour de 4 volts au total, et c'est déjà beaucoup. On peut se tenir convenablement entre 500 millivolts et 2.4 volts, et ce sera parfait comme ça ! Expérimentez et vous allez apprécier rapidement le contact direct avec le treillis de broche relié à la tige d'acier à l'extérieur de la maison. Le corps a besoin de se charger d'électrons.
Claudius Cartapus
To download the PDF document, click on +More, and Download. 😉